RocketFish RF-RBWSO2 - Manual (Page 19)

19 RF-RBWS02
Connect the adapter to a power outlet
Notes: Make sure that the power outlet matches the sender/receiver’s AC input
(100-240V) before connecting.
Connect the AC adapter to a power outlet only after all other connections are
completed.
To connect the power:
• Connect one end of the adapter to the DC IN jack of the sender/receiver,
then plug the other end into a power outlet. The device automatically
powers up. To put the device into standby, press the Power button.
Adjusting the antennas
Adjust the two external antennas as far away from the AC adapter, a
TV, or other radiation source as possible.
Note: Make sure that the device is located at least 18” from any wireless router.
Connecting to the AC adapter
RF-RBWS02_09-0535_MAN_ENG_V1.fm Page 19 Thursday, August 27, 2009 7:39 PM