Roberts Gorden EP 200 Series - Manual (Page 16)

EP-200 S ERIES P UMP I NSTALLATION , O PERATION AND S ERVICE M ANUAL
10
FIGURE 7: Wall Mounting
5.2.2 Mounting Platform (Optional Platform Assembly)
If mounting on an outside wall is not practical, it may
be mounted on a platform suspended from the
ceiling, or for noise reduction, in an enclosure.
FIGURE 8: Mounting Platform Assembly
Mounting
Angle
Assembly
(Standard) 4" (102 mm)
Tube
Pressure
Switch
Thimble
(if applicable)
5/8" (16 mm)
Diameter
Mounting Holes
8.5"
(216mm)
7"
(178 mm)
3.9" (99 mm)
5-6"
(127-152 mm)
4.5" x 8" (114 x 203mm)
Boot with Spacer
Silicone Rubber Ring
(Install on 4" (102 mm) Tube)
7"
(178 mm)
11.5"
(292mm)
7"- 8"
(178-203mm)
10" (254mm)
3.25" (83mm)
4.5" X 8" (114 x 203mm)
Boot with Spacer
5-6"
(127-152mm)
Mounting
Angle (4)
Hex Head Bolt
Flat Washer
Lockwasher
Hex Nut
Flat Washer
11.5" or 7"
(292 mm or
178 mm)