Renesas 70 - Manual (Page 70)

Chapter 4 Applications Development Procedure Overview
- 60 -
4.1 Overview
Application programs for MR308 should generally be developed following the procedure described below.
1. Generating a project
When using HEW 40 , create a new project using MR308 on HEW.
2. Coding the application program
Write the application program in code form using C or assembly language. If necessary, correct the
sample startup program (crt0mr.a30) and section definition file (c_sec.inc or asm_sec.inc).
3. Creating a configuration file
Create a configuration file which has defined in it the task entry address, stack size, etc. by using an
editor.
The GUI configurator available for MR308 may be used to create a configuration file.
4. Executing the configurator
From the configuration file, create system data definition files (sys_rom.inc, sys_ram.inc), include files
(mr308.inc, kernel_id.h), and a system generation procedure description file (makefile).
5. System generation
Execute the make 41 command or execute build on HEW to generate a system.
6. Writing to ROM
Using the ROM programming format file created, write the finished program file into the ROM. Or load
it into the debugger to debug.
Figure 4.1 shows a detailed flow of system generation.
40 It is abbreviation of High-performance Embedded Workshop.
41 The make command comes the UNIX standard and UNIX compatible.