Renesas 70 - Manual (Page 135)

Chapter 6 Using Configurator
- 125 -
6.2.2 Setting Configurator Environment
Before executing the configurator, check to see if the environment variable "LIB308" is set correctly.
The configurator cannot be executed normally unless the following files are present in the directory indicated by
the environment variable "LIB308":
•
Default configuration file (default.cfg)
This file can be copied to the current directory for use. In this case, the file in the current directory is
given priority.
•
System RAM area definition database file (sys_ram.inc)
•
mr308.inc template file (mr308.inc)
•
Section definition file(c_sec.inc or asm_sec.inc)
•
Startup file(crt0mr.a30 or start.a30)
•
makefile template file(makefile.dos)
•
MR308 version file(version)