Radio Shack ET-1119 - Manual (Page 16)

16
For each stored number, write the per-
son’s or company’s name next to the ap-
propriate location number on the
supplied memory directory sticker. Peel
the backing from the sticker and attach it
to the phone.
To replace a stored number, simply
store a new one in its place.
Editing or Deleting a Number in
Memory
Follow these steps to edit or delete a
memory number.
1. Lift the handset.
2. Hold down MEM until Memory
Store and a list of memory loca-
tion numbers appear on the display.
3. Choose a memory location ( 1 - 0 ) by
pressing a number or by repeatedly
pressing
or .
4. Press SELECT . A menu appears
with the three options listed below.
Press
or to choose an
option, follow the instructions listed,
then press
SELECT .
Edit Memory n . Edit the record as
described in Steps 5 through 8 of
“Storing a Name and Number in
Memory” on Page 15.
Delete Memory n . The display
prompts you to confirm the deletion.
Move the cursor to
Yes , then press
SELECT or DELETE . The phone
beeps, and Memory n Deleted
appears.
Go Back . Returns you to the list of
memory numbers.
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To en-
ter a 2-second pause, press
PAUSE . P
appears on the display. You can add
more pause entries for a longer pause.
PAUSE
43-1119.fm Page 16 Thursday, September 16, 1999 1:58 PM