Radio Shack ET-1119 - Manual (Page 13)

13
OPERATION
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and
press
TALK (the CHARGE/IN USE indi-
cator on the base lights), then dial the
number. You view the number as you di-
al, then (after a few seconds) the call’s
elapsed time.
Note: You can also dial the number be-
fore you press
TALK . If you make a mis-
take, repeatedly press DELETE until the
incorrect entry is deleted, then enter the
correct number. To delete all the num-
bers, hold down
DELETE for at least 1
second.
To answer a call, lift the handset from
the base and press
TALK . If auto talk is
on, just lift the handset from the base,
or, if the handset is away from the base,
press any key.
To end a call, place the handset on the
base or press
TALK .
ADJUSTING THE
HANDSET VOLUME
To adjust the volume of the sound you
hear through the handset during a call,
press
VOL or . You can adjust
the handset volume to Volume Low ,
Volume Medium , Volume High , or
Volume Maximum .
USING REDIAL
You can quickly dial the last number di-
aled. Lift the handset and press
TALK ,
then press REDIAL .
Notes:
• You can also press REDIAL (so you
view the stored number) first, then
press
TALK .
• The redial memory holds up to 32
digits, so you can redial long-dis-
tance as well as local numbers.
• The redial memory also holds pause
entries. See “Entering a Pause” on
Page 16.
43-1119.fm Page 13 Thursday, September 16, 1999 1:58 PM