Starting a broadband internet session – RCA 300 Series User Manual
Page 41
3 SpeedTouch™ Internet Connectivity
E-SIT-CTC-20030702-0003 v4.0
39
9
In the next window, fill in the Internet account information. This information
should be provided by your service provider:
10
At the end of the configuration the following window appears:
Click Finish to complete the configuration.
The Connect MyISP window (see below) appears.
Starting a broadband
Internet session
Proceed as follows:
1
On the Start menu, point Connect To and click the name of the connection you’ve
created e.g. MyISP.
Note
If you are using the classic Start menu click Start > Settings > Network
(and Dial-up) connections > MyISP.
2
The Connect MyISP window appears:
3
If needed, enter user name and password for your user account at the Service
Provider.
4
Click Connect.