Ruby Tech IPES-5308 - Manual

IPES-5308
Unmanaged Fast Ethernet PoE Switch
Technical Specifications Technical Specifications
Description: 8-Port Unmanaged 10/100 Fast Ethernet Switch with 4
PoE Ports
Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
Media: 10BASE-T: UTP Cat. 3, 4, 5 or up
100BASE-TX: UTP Cat. 5 or up
No. of Port: 8*10/100 Mbps RJ-45 ports with 4 PoE ports
Auto MDI/MDI-X: Yes
Transmission Mode: 10/100Mbps, full/half-duplex (Auto-sensing)
Transfer Rate: 10Mbps:
14880pps (64 Bytes Package)
100Mbps: 148800pps (64 Bytes Package)
Flow Control: IEEE 802.3x flow control for full-duplex
Back pressure in half-duplex operation mode
Switching Method: Store & forward
LEDs: Power, Link/Act,Speed, PoE activity
Ambient Temperature: -10 C to 60 C
Humidity: 5%
to 90%
Voltage:
Power Consumption: 65W
Physical Dimension: 44(H) X 220(W) X 130.5(D) mm
Weight: 1kg
Safety: Comply with FCC Part
15 Class A & CE Mark Approval
Shock test approval: IEC60068-2-27
Freefall test approval: IEC60068-2-32
Vibration test approval: IEC60068-2-6
Casing: IP30 Protection
Warranty: 3 Years
Packing Information Packing Information
Order Information Order Information
IPES-5308 8-Port Unmanaged 10/100 Fast Ethernet Switch
with 4 PoE Ports
I
n
d
u
s
t
r
i
a
l
E
t
h
e
r
n
e
t
Industrial Ethernet
RUB
TECH
Networking & Communications
R
Model
IPES-5308
Carton Pcs/Carton N.W (KG) G.W (KG)
Dimensions(mm)
495x480x335 10 16 17
Ruby Tech Corp.
3F, No.1, Lane 50, Nan Kang Road, Sec.3, Taipei, Taiwan http://www.rubytech.com.tw
TEL:886-2-2785-3961 FAX:886-2-2786-3012 E-mail [email protected]
2008-06.27-Version A
Technical information listed is subject to change without prior notice. All brand names and trademarks are property of their respective owners.
Copyright c 2008 Ruby Tech Corp. All rights reserved.
Preliminary
DC 48V ( power input by terminal block)
IPES-5308:
Industrial 8-Port Unmanaged 10/100 Fast Ethernet Switch with 4 PoE Ports
Key Features Key Features
Conforms to IEEE 802.3 10BASE-T,
IEEE 802.3u 100BASE-TX and IEEE
802.3x flow control standards
Supports 10/100Mbps auto-detect half/
full duplex
Supports TP interface auto MDI/MDI-X
function for auto TX/RX swap
Supports 802.3x flow control pause
packet for full duplex
LEDs to indicate: Link/Act, Speed,
Power Status and PoE activity
Alarm contact function
DIN-Rail,Wall mount and Desktop for
easy installation
RoHS Compliance
PoE Features PoE Features
Supports IEEE 802.3af compliant
Supports 4-Port PoE ports
Supports Power over Ethernet (PSE) on
each PoE-TP port (End-Point)
Full power(15.4w) support for per PoE-
TP port
Auto detect powered device and
consumption levels
Smart feature for PD on/off, PD
detection, power level, PD status and
power feeding priority(X)
Automatic Fault Detection(Over/Under
Voltage & Current)
Thermal shutdown protection(Tj >150 C)
LED indicators for PoE activity
Overview Overview
PoE Save Your Power Infrastructure
Cost
PoE allows power to be supplied to end
devices, such as Wireless Access Points or
VOIP Phones, directly through the existing
LAN cables. By supplying the power end-
span, you can centralize power distribution
and backup without the need to increase
infrastructure