Loading paper in the interposer – Ricoh Aficio 2075 User Manual
Page 125

Troubleshooting
118
6
CCCC
Press the
{{{{Down}}}} key.
The key blinks while the bottom
plate is moving down.
DDDD
Load paper by repeating steps
BBBB
and
CCCC
.
Note
❒ The tray can hold up to 4,000
sheets.
EEEE
Close the top cover of the large ca-
pacity tray (LCT).
Important
❒ Align the left edge of the copy
paper stack to the left edge of
the tray.
Loading Paper in the Interposer
Important
❒ Load paper on the side already
printed (the side you want as
front).
❒ Load paper in the interposer in the
same orientation as paper in the
paper tray.
❒ The staple or punching location
will be on the left side of the paper,
when you are facing the machine.
❒ Do not place anything on top of or
leave documents on the sensor. This
may lead to the paper size not being
correctly scanned or paper jams.
AAAA
Load the paper.
Important
❒ Confirm the top of the stack is
not higher than the limit mark
inside the tray.
Note
❒ Shuffle paper before loading.
❒ Straighten curled or warped pa-
per before loading.
BBBB
Adjust the paper guides to the pa-
per size.
MartiniC1_GBzen2_FM.book Page 118 Friday, April 19, 2002 2:18 PM