Russound CAV6.6 - Manual (Page 88)

88
Additional amplification can be added to the CAV6.6
when more power or more speakers are desired.
This configuration adds an external amplifier to
the CAV6.6. The Zone Audio (To Amp) Outputs
are variably controlled by the associated UNO-
S2 keypad and can be connected to an external
amplifier. The figure shows an amplifier used in
this manner. The configuration has five zones
connected to an additional amplifier with one
zone outputting to speakers.
Source Components
In this configuration, three of a possible six
audio/video source input components are used.
The source components are connected to the
source Audio/Video Input Connections at the
first three inputs using quality RCA cables.
Zone Audio (To Amp) & Video Outputs
In this option the Zone Audio (To Amp) Outputs for
zones 2 through 6 have the outputs connected to
the inputs of an external amplifier. The speakers
for these zones are run to the output of the exter-
nal amplifier for each of these zones.
An amplified subwoofer is attached to the Zone
Audio Output for zone 1 while its amplified
CAV6.6 output speaker connection is also still
intact. This allows the user to increase the out-
put of the bass response while keeping the
stereo output from the CAV6.6.
Keypads
The configuration uses a single UNO-S2 Keypad
per zone on the CAV6.6. Each keypad is con-
nected to the UNO System Keypad Port using
the CAT-5 T568A RJ-45 wiring configuration.
This gives complete control of each of the 6
UNO System Controlled Zones to the correspon-
ding UNO-S2 Keypad.
SAMPLE SYSTEM CONFIGURATION 5
Additional Amplification
Components List:
1 - CAV6.6 Controller
6 - UNO-S2 Keypads
1 - R1250MC Multi-zone Amplifier
3 - pair Advantage Iso-Mount Speakers
3 - pair Advantage Twist & Tilt Speakers
3 - 845.1 Micro Emitters