Installer, Installation menu – Russound CAV6.6 User Manual

Page 54

INSTALLER

INSTALLATION MENU

Numeric IR (cont’d)

a. Selected: Learned IR

Choose Learned IR if the pre-programmed IR code library does

(LrnIR)

not support the source component.

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 8)

b. Selected: Unassigned

The numeric IR Prefix command is cleared. Procedure advances

(Unasg)

to SUFFIX CMD (step 9)

c. Selected: Default

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 8)

d. Selected: Macro:

(To build macros, see Macro Editor page 60)

i. MACRO -

Macro loads a series of commands which are processed when

(Macro)

activated.

ii. MACRO ID –

Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)

(MacID)

e. All Other Selections:

Procedure advances to DEVICE CODE (step 7)

7. DEVICE CODE –

Source component code for IR control.

(DevCd)

8. KEY FUNCTION –

Select a function (Disc, etc.).

(KeyFn)

9. SUFFIX CMD –

Tells the system whether a command will be issued after the

(Sufix)

selection of the numerical value (e.g., 1, 2

Enter). If “no,” proce-

dure advances to SAVE CHANGES (step 13)

10. COMMAND TYPE –

Select the type of source command (e.g., CD, TV, etc.).

(CmdTp)