Zone setup (zonsu), Installer, Installation menu – Russound CAV6.6 User Manual
Page 56
56
INSTALLER
INSTALLATION MENU
Source Select Command (cont’d)
e. All Other Selections:
Procedure advances to DEVICE CODE (step 3)
3. DEVICE CODE –
Source component code for IR control.
(DevCd)
4. KEY FUNCTION –
Select a function (Play, Enter, etc.).
(KeyFn)
5. SAVE CHANGES? –
Select “yes” to save the changes.
(Save?)
# OF SOURCES (#Srcs)
At this field it is necessary to enter the number of sources used in the CAV6.6 system (1 to 6). This
limits the sources displayed on the keypad in the normal running mode when the source button is
pressed, but also limits source selections in the configuration menus.
See Source Setup Menu on
Page 50 and Source Select Command & # Of Sources - Flow Chart on page 66
ZONE SETUP (ZonSu)
NOTE: This procedure should be performed using the keypad installed in the zone to be configured.
See Installation Menu on Page 50 and Zone Setup - Flow Chart on page 67
Zone Setup allows the installer to adjust properties of the UNO Keypad controlled CAV6.6 zone. This
series of menus allows the system’s zones to be configured for these properties:
ZON VOL TRIM (ZonVT)
SYSON ENABLE (SysOn)
PARTY ENABLE (PtyEn)
MAS-
TER ENABL
(MstEn)
PAGE ENABLE (PagEn)
PAGE VOLUME (PagVl)
1. ZON VOL TRIM -
This feature allows the installer to adjust the output volume to
(ZonVT)
each zone. -16 dB (lowest) to 0 dB (max)(default).
2. SYSON ENABLE -
This feature is either disabled or enabled. If disabled (default), an
(SysOn)
All On command activated from another zone will not turn on the
disabled zone. If enabled, an All On command activated from
another zone will turn on the enabled zone.
3. PARTY ENABLE -
This feature is either disabled or enabled. If disabled, Party Mode
(PtyEn)
activation from another zone will not affect the disabled zone. If
enabled (default), the zone will participate with Party Mode.
4. MASTER ENABLE -
This feature is either disabled or enabled. If disabled, the zone
(MstEn)
cannot host a master keypad during Party Mode. If enabled
(default), the zone has the option of hosting the Master keypad.