RCA Rio Karma User Manual
Rio karma, User’s guide
Table of contents
Document Outline
- Rio Karma
- User’s Guide
- Package Contents
- Copyright/Trademarks
- Table of Contents
- Chapter 1 Getting Started
- Chapter 2 Connections
- Chapter 3 Software Setup
- Chapter 4 Basic Operations
- :: Basic Operations
- :: Copy
- :: Transfer
- Rio Music Manager
- 1 Launch the Rio Music Manager.
- 2 Click My Music in the left frame to access tracks. Rio Music Manager will scan the computer’s h...
- 3 Select tracks within a category. Categories include Albums, Artists, Genres, Songs, and Playlis...
- 4 Use any of the following techniques to select tracks:
- 5 After the tracks have been selected they can be transferred to the Rio Karma by clicking .
- 1 Launch the Rio Music Manager.
- RealOne Player
- 1 Launch RealOne Player.
- 2 Connect the Rio Karma to the computer using the USB cable.
- 3 Turn the Rio Karma on.
- 4 Click DEVICES at the bottom of the RealOne window. The Devices window appears.
- 5 Double-click Rio Karma.
- 6 Click ADD CLIPS in the command bar at the bottom of the RealOne window. The Add Clips window ap...
- 7 Select the tracks to be transferred to the Rio Karma.
- 8 Click Add Clip to queue the tracks to be transferred and close the Add Clips window.
- 9 Click TRANSFER in the command bar at the bottom of the window to begin downloading the selected...
- 1 Launch RealOne Player.
- Rio Music Manager
- :: Control
- :: Play
- :: Artist
- :: Album
- :: Track
- :: Playlist
- :: Rio DJ
- :: Genre
- :: Year
- Chapter 5 Advanced Features
- :: Advanced Features
- :: Equalizer
- :: Organize
- :: Bookmarks
- :: Settings
- :: Features
- :: About Track
- :: About Rio Karma
- Chapter 6 Help
- :: Troubleshooting
- Customer Service Information
- Frequently Asked Questions
- 1 Reset the player by inserting a pin or needle into the RESET HOLE next to the DC IN port.
- 1 Reset the player by inserting a pin or needle into the RESET HOLE next to the DC IN port.
- 1 Connect the Rio Karma to the computer using the USB cable.
- 1 Click the following link: www.rioaudio.com/support
- 1 Connect the player to your computer with the USB cable.
- 1 Click Start on the Windows desktop.
- 2 Click Settings.
- 3 Click Control Panel.
- 4 Double-click the Network icon.
- 5 Click the TCP/IP component installed for your Ethernet card.
- 6 Click Properties.
- 7 Click Specify an IP address on the IP Address tab.
- 8 Type 192.168.0.x (where x is a number between 2 and 254) in the IP Address field. The new IP ad...
- 9 Type 255.255.255.0 in the Subnet Mask field.
- 10 Click OK.
- 11 Click OK.
- 12 Click Yes when prompted to restart your computer.
- 1 Click Start on the Windows desktop.
- 2 Click Control Panel.
- 3 Double-click Network and Dial Up Connections.
- 4 Click Properties.
- 5 Click Internet Protocol (TCP/IP).
- 6 Click Properties.
- 7 Click Use the following IP address:.
- 8 Click Specify an IP address on the IP Address tab.
- 9 Type 192.168.0.x (where x is a number between 2 and 254) in the IP Address field. The new IP ad...
- 10 Type 255.255.255.0 in the Subnet Mask field.
- 11 Click OK.
- 12 Click OK.
- 13 Click Yes when prompted to restart your computer.
- 1 Click Start on the Windows desktop.
- 2 Click Control Panel.
- 3 Click Network and Internet Connections.
- 4 Click the Network Connections Control Panel icon.
- 5 Double-click Local Area Connection.
- 6 Click Properties.
- 7 Click Internet Protocol (TCP/IP).
- 8 Click Properties.
- 9 Click Use the following IP address:.
- 10 Click Specify an IP address on the IP Address tab.
- 11 Type 192.168.0.x (where x is a number between 2 and 254) in the IP Address field. The new IP a...
- 12 Type 255.255.255.0 in the Subnet Mask field.
- 13 Click OK.
- 14 Click OK.
- 15 Click Yes when prompted to restart your computer.
- :: Glossary of Digital Audio Terms
- :: Limited Warranty and Software License
- :: FCC and Industry Canada Compliance
- :: Safety
- :: Troubleshooting
- Index