Ricoh Caplio R7 - Manual (Page 96)

94
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
1
Switch the mode selector to 5, and press the ADJ.
button.
2
Press the ADJ. button left or right, or press the #$
buttons until the white balance menu appears.
3
Press the ADJ. button up or
down or press the !" buttons
to select [M].
4
Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5
Press the DISP. button.
• The white balance is set.
6
Press the ADJ. button or the
MENU/OK button.
• The symbol appears on the screen.
• The screen is displayed with the white
balance set in Step 5. If the result is
not as expected, repeat Steps 4 and 5
to change the settings as many times
as required.
Note ----------------------------------------------------------------------------------------------
To cancel [Manual Settings], select a setting other than [M] in Step 3.
Setting the White Balance Manually
(Manual Settings)