Ricoh Caplio R7 - Manual (Page 174)

172
6
Do
w
n
lo
ad
in
g
I
m
ag
es to
Y
o
u
r Co
m
p
u
ter
Perform the following operations when disconnecting the camera
from your computer. (The display is an example of Windows XP.
The terms are different for other operating systems but the
operations are the same.)
1
Double-click the [Safely Remove
Hardware] icon at the right end of
the task bar.
2
Select [USB Mass Storage Device] and click [Stop].
3
Check that [USB Mass Storage Device] is selected and
click [OK].
4
Click [Close].
5
Disconnect the USB cable.
Note ----------------------------------------------------------------------------------------------
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed. Be sure to stop the connection before
removing the USB cable.
• Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.
Disconnecting the Camera from Your Computer