Ricoh Caplio R7 User Manual
Page 151
149
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
When functions are assigned to the ADJ. button, you can display
various shooting setting screens with fewer button operations and
without displaying the Shooting menu.
You can use [ADJ Btn. Set.1] to [ADJ Btn. Set.4] to assign camera
functions that can be activated by pressing the ADJ. button.
To assign a function to [ADJ Btn. Set.1] to [ADJ Btn. Set.4], follow
the steps below.
1
Display the Setup menu.
• For the operating procedure, see P.133.
2
Press the " button to select [ADJ Btn. Set.1], [ADJ Btn.
Set.2], [ADJ Btn. Set.3], or [ADJ Btn. Set.4], and then
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
For information on how to use the ADJ. button, see P.62.
Assigning Functions to the ADJ.
Button (ADJ Btn. Set.)
Available Settings
Refer to
Off
*Default setting for [ADJ Btn. Set.4]
-
Expo. Cmp
*Default setting for [ADJ Btn. Set.1]
P.90
Wht. Bal.
*Default setting for [ADJ Btn. Set.2]
P.92
ISO
*Default setting for [ADJ Btn. Set.3]
P.95
Quality (Pic Quality/Size)
P.69
Focus
P.71
Sharp
P.75
AE Meter
P.74
Cont Mode
P.76
Auto BKT
P.81