Radio Shack 43-3537 - Manual (Page 8)

8
& +#.+0) " # "/ '/14; "0 7/$'4
To dial a number stored in memory, lift the
handset and press
MEM . The list of memory
location numbers appears. Choose a
memory location (
''''
–
&&&&
) by pressing a number
or by repeatedly pressing
8
or
9
, then
press TALK .
You can also dial a memory number after
pressing
TALK . Press MEM (the display does
not change but the phone’s memory recall
activates), then press the desired memory
location number.
%
*#+0
/&
+#.+0)
"5
'48+%'
"
0
7/$'45
For quick recall of numbers for special
services (such as bank-by-phone), store
each group of numbers in its own memory
location.
Dial the service’s main number first. Then, at
the appropriate place in the call, press
MEM
and enter the number for the location where
the additional information is stored.
6 '56+0) "5 614'& "' /'4)'0%; "
0 7/$'45
If you store an emergency service’s number
(police department, fire department,
ambulance) and you choose to test the
stored number, make the test call during the
late evening or early morning hours to avoid
peak demand periods. Also, remain on the
line to explain the reason for your call.
52''&"&+#.+0)
You can store one number you dial often in
the phone’s speed dial memory. Speed dial
lets you dial a number by pressing a single
button.
±
5
614+0)
"
#
"0
7/$'4
"
+0
"5
2''&
"
&
+#.
1. Lift the handset.
2. Hold down SPEED DIAL until
Ijeh[ý Ijeh[ý Ijeh[ý Ijeh[ý
DkcX[h DkcX[h DkcX[h DkcX[h
appears.
3. Follow the steps under “Storing a
Number and Name in Memory” on
Page 7 to store a number.
4. Press SEL . The phone beeps and
DkcX[hýIjeh[Z DkcX[hýIjeh[Z DkcX[hýIjeh[Z DkcX[hýIjeh[Z
appears.
& +#.+0) " 6*' "5 2''& "& +#. "
0 7/$'4
Simply press SPEED DIAL to dial the stored
speed dial number. You do not have to press
TALK .
' &+6+0) " 6*' "5 2''& "& +#. "
0 7/$'4
1. Lift the handset.
2. Hold down SPEED DIAL until the speed
dial menu appears.
3. Press
9#
to choose
;Z_jýDkcX[h ;Z_jýDkcX[h ;Z_jýDkcX[h ;Z_jýDkcX[h
, then
press SEL .
4. To edit the number, repeatedly press
DEL/CH to erase up to the correct entry,
enter the correct number, then press
SEL .
& '.'6+0) " 6*' "5 2''& "& +#. "
0 7/$'4
1. Lift the handset.
2. Hold down SPEED DIAL until the speed
dial menu appears.
3. Press
9#
to choose
:[b[j[ýDkcX[h :[b[j[ýDkcX[h :[b[j[ýDkcX[h :[b[j[ýDkcX[h
, then
press SEL .
4. Press
8#
to move the cursor to
O[i O[i O[i O[i
, then
press SEL or DEL/CH . The phone beeps
once and
DkcX[hý:[b[j[Z DkcX[hý:[b[j[Z DkcX[hý:[b[j[Z DkcX[hý:[b[j[Z
appears.
%#..'4"+&"12'4#6+10
If you subscribe to Caller ID service from your
phone company, the phone company sends
information about the call, as well as the time
and date, between the first and second rings
of every call you receive. The phone displays
this information after the second ring, and it
stores up to 30 Caller ID records for later
review. It also shows if the caller information
is unavailable or if the name and number
were blocked by the caller (see “Caller ID
Messages” on Page 9).
If you subscribe to Call Waiting with Caller ID,
you hear a tone through the handset when a
call comes in, then the Caller ID record
appears. If the Caller ID memory becomes
full, any new call replaces the oldest call’s
record.
+
/2146#06
"%
#..'4
"+&"
+
0(14/#6+10
To use the phone’s Caller ID and Caller ID
with Call Waiting features, you must be in an
area where those services are available and
you must subscribe to those services through
your local phone company.
Where Caller ID is offered, one or more
options are generally available:
• caller’s number only
• caller’s name only
• caller’s name and number
± ± ± ±
"016'"
± ± ± ±
"
The memory location used by the phone to
store a speed dial number is separate from
those used to store names and numbers.