RCA H5400 - Manual (Page 22)

Deleting All Caller ID Records
To delete all the Caller ID records in memory:
1. Use the CID/4 button and then 3or4 button to
display any Caller ID record.
2. Press and hold DELETE. The display asks DELETE ALL? for
several seconds.
3. Press DELETE again, within five seconds, to erase all
records. The display will return to standby mode.
Caller ID Errors
If there is an error in the transmission of information to
your Caller ID phone, INCOMPLETE DATA is displayed.
If you have not subscribed to Caller ID service or it is not
working, NO DATA is displayed.
Call Waiting Caller ID
Provided you subscribe to Caller ID with Call Waiting
service from your phone company, you may see who
is calling when you hear the call waiting tone in the
receiver. The CID information appears in the display after
you hear the tone.
Press the FLASH button to put the current call on hold and
answer the incoming call. Press FLASH again when you want
to return to the first call.
IMPORTANT: In order to use all of the features of this unit,
you must subscribe to either the standard Name/Number
Caller ID Service or Call Waiting Caller ID Service. To know
who is calling while you are on the phone, you must
subscribe to Call Waiting Caller ID Service.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury,
use only the Thomson Inc. approved Nickel-metal
Hydride (Ni-MH) battery model 5-2650, that is
compatible with this unit.
1. Make sure handset is OFF (not in TALK mode) before
you replace battery.
2. Remove the battery compartment door.
3. Disconnect the battery plug from the jack inside the
battery compartment and remove the battery pack
from the handset.
4. Insert the new battery pack and connect the cord to
the jack inside the battery compartment.
Telephone Operation