RCA H5400 - Manual (Page 18)

1
Reviewing, Changing or Deleting Stored
Names/Numbers
To Review: Press DIR/3on the handset, then press the
3
or4 button to scroll through the stored numbers. Or
press the memory location number.
To Change: While viewing the record, press the SELECT/
SAVE button. Follow the steps under Storing a Name and
Number in Memory.
To Delete: Press DIR/3on the handset, then press the
3
or4 button to scroll to a desired memory.
1. Press the DELETE button. DELETE? is displayed.
2. Press DELETE again to confirm.
Dialing a Stored Number
Make sure the phone is ON (in TALK mode).
1. Press the DIR/3button.
2. Press the desired memory location button (01-40) or
use the 3or4button to scroll to the desired telephone
number.
3. Press SELECT/SAVE to dial the displayed number.
-Or-
1. Make sure the phone is
OFF (not in TALK mode).
2. Press the DIR/3 button.
3. Press the desired memory location button (01-40), or
use the 3or4button to scroll to the desired telephone
number.
4. Press the TALK button. The telephone number dials
automatically.
Chain Dialing from Memory
Use this feature to make calls that require a sequence of
numbers, such as a frequently used long distance card
number. The following example shows how you can store
each part of the long dialing sequence and use chain
dialing to make a call through a long distance service
provider:
The Number For
Memory Location
Long Distance Access Number 7
Authorization Code 8
Frequently called long distance number 9
Make sure the phone is ON.
1. Press DIR/3 button and then press 0 followed by 7.
Telephone Operation