RCA H5400 - Manual (Page 12)

1
Local Area Code
1. Press the MENU button once, then press the 4 button
until AREA CODE is displayed.
2. Press the SELECT/SAVE or STORE button to select.
3. Use the number pad to enter your three digit area code.
The default is “---”.
4. Press the SELECT/SAVE button again to store the setting.
Regional Area Code
You can enter six regional codes.
1. Press the MENU button once, then press the 4 button
until REGIONAL CODE is displayed.
2. Press the SELECT/SAVE or STORE button to select.
3. Use the number pad to enter your three digit regional
code. If you make an error while entering a code, press
the DELETE/CHANNEL button to delete the character.
4. When all digits are entered into a code, the cursor will
automatically go to the next one. You may also press
the 3 or 4 button to move through the six codes.
5. When you have finished entering the codes, press the
SELECT/SAVE button again to store the setting(s).
Clear All Memories
1. Press the MENU button once, then press the 4 button
until
CLEAR ALL MEM is displayed.
2. Press the SELECT/SAVE or STORE button to select.
3. Press the 3 or 4 button on the handset to select YES.
4. Press the SELECT/SAVE button again to clear all the
records in the phonebook memory.
Set Time
The time cannot be set manually in the handset,
only at the base. Any update to the base time will be
automatically sent to the handset.
Registration (Re-Registration)
Registration links the cordless handset to the base which
allows the handset to use the base’s phone connection. A
cordless handset will not operate until it is registered to
the base. During the registration process, keep the handset
near the base. If your handset becomes unregistered, it
may be necessary for you to re-register to the base. To do
so follow the steps below.
1. Press the MENU button once, and then press 4 button
until REGISTRATION is displayed.
Telephone Operation