Raritan Computer DOMINION DSX-0N-E - Manual (Page 214)

196 D OMINION SX U SER G UIDE
11. To add new users and configure RADIUS (IETF) attributes, click User Setup in the left
panel of the screen.
12. Type the user’s name and click Add/Edit.
13. To edit existing users, click User Setup in the left panel of the screen and click List All
Users.
14. Select a user from the list.
15. Once you have selected a user, on the user properties page, scroll down to the IETF
RADIUS Attribute section.
16. Click on the Filter-Id check box and add the following value for this attribute:
Raritan:G{Admin}
The value in G{} is the name of a group locally on the DSX, in this case the default
Admin group.
• The value can be Raritan:G{Admin}:D{1234567890} if using dial back feature,
where 1234567890 is the phone number for dial back.
• The value Raritan:G{Admin} must match with the local group on the Dominion
SX unit
• The Dominion SX comes from the factory with the default Admin group.
• Additional user groups can be created on Dominion SX unit by using the User
Management>User Group option.
• Appropriate port access and user class (Operator or Observer) can be defined and
the group name should be specified in the Filter-Id attribute value accordingly in
order to authorize the RADIUS user to access the Dominion SX unit
17. Click Submit.
Note: If there is more then one Radius user requiring the same authorization on the
Dominion SX, the Filter-Id attribute and its value can be defined at the group level on the
Cisco ACS as long as these users belong to the same group.