Raritan Computer DOMINION DSX-0N-E - Manual (Page 156)

138 D OMINION SX U SER G UIDE
Do you want to proceed with the reboot? (no/yes) (default: no)
yes
Restore Command
The restore command retrieves a copy of the Dominion SX system from a system and writes the
file to the Dominion SX server.
The syntax of the restore command is:
restore [ip IP] [path PATH] [file FILE]
The restore command options are described in Table 49.
Table 52 Restore Command
C OMMAND O PTION D ESCRIPTION
[ip IP] IP address of the target system from which the restore data will be
retrieved.
Username of the account on the system where the restore data is
stored.
Password for the above account.
[path PATH] Specifies the path to the backup file to be restored to a similar system
with the same port density.
[file FILE] Specifies the name of the file in which the backup data was saved.
Restore Command Example
In the example below, the console server data is being retrieved from a system at IP address
192.168.51.220
. The guest account and password are used. The data will be pulled from
the top level of the guest account in a file named backupfile.
admin > system > restore ip 192.168.51.220 login guest passwd
guestpassword path . file backupfile1
Sendeventlog Command
The sendeventlog command sends the local logfile to a remote FTP server.
The syntax of the sendeventlog command is:
sendeventlog [ip ipaddress] [login login] [password password]
[path pathname] [file filename]
The sendeventlog command options are described in Table 53
Table 53 Sendeventlog Command
C OMMAND O PTION D ESCRIPTION
ip ipaddress
FTP server IP address
login login
FTP Server login name
password password FTP Server password
path pathname FTP server path. For example, /ftphome
file filename Filename on FTP server to save log. For example, sxlogfile