Raritan Computer DOMINION DSX-0N-E - Manual (Page 140)

122 D OMINION SX U SER G UIDE
admin > Config > User > editgroup name Anonymous class op ports
1,2,3,4,5
Editing group...
Group Anonymous: Configuration Saved
The 'Anonymous' group is successfully configured.
DPA Anonymous access:
The DPA is already configured. (See the DPA configuration settings section.)
DPA Mode is IP, IP 10.0.13.240 is assigned to port 1.
When accessing the serial port with Anonymous port access, the user name should be
“Anonymous” and empty password as is shown below (The Anonymous access is
granted if both fields username and password are empty ):
ssh –l Anonymous 10.0.13.240
Password:
Authentication successful.
Starting DPA for port 1
Authentication successful.
Escape Sequence is: Control-]
You are now master for the port.
Encryption Command
The encryption command sets the type of encryption for HTTPS.
Note: The factory default value of this protocol is SSL.
The syntax of the encryption command is:
encryption [prot ]
The encryption command options are described in Table 28.
Table 28 Encryption Command
C OMMAND O PTION D ESCRIPTION
prot
Select TLS or SSL encryption
Encryption Command Example
The following example sets SSL encryption for HTTPS.
admin > Config > Services > encryption prot SSL
HTTP Command
The http command is used to control http access and redirection, and define the port.