Ricoh Monochrome PoCl Camera Link Camera FV-L030B1 User Manual
Page 28
28/32
FV-L030B1
User’s Guide Rev. 1.01
Command No.
Command Descriptions
28H:
DLY[7
0]
29H
DLY[15...8]
[Delay time for the trigger] Initial Data: DLY[7
0] = 0, Data Range: 0 to 65,535
Sets the delay time from the trigger input signal to the start of the exposure.
At 90 fps: Delay time (us) = 74 x 0.0271606 * DLY[7
0] = 2.0099 (us) * DLY[7
0],
At 60 fps: Delay time (us) = 74 x 0.0407408 * DLY[7
0] = 3.0148 (us) * DLY[7
0],
At 30 fps: Delay time (us) = 74 x 0.0814816 * DLY[7
0] = 6.0296 (us) * DLY[7
0],
where CLK = pixel clock.
30H
PGA[7
0]
[CDS gain] Initial Data: PGA[7
0] = 0, data range: 0 to 255
Sets the CDS gain (programmable analog gain).
CDS gain (dB) = ( (PGA[7..0] + GOFS[7..0] ) * 2 * 0.0351) + 6
*GOFS[7...0]: The gain offset (The value of the address 32H)
31H
DGB[7
0]
[Digital gain] Initial Data: The factory adjusted value, data Range: 0 to 255
Output level = (input level - CLAMP[7
0]) * (1 + DGB[7..0] / 128) + clamp level
*CLAMP[7...0]: clamp level (The value of the address 38H)
32H
GOFS[7
0]
[Gain offset] Initial Data: The factory adjusted value, data range: 0 to 255
38H:
CLAMP[7
0]
[Clamp level] Initial Data: CLAMP[7
0] = 9, Data Range: 0 to 255
Sets the clamp level value of the black level.
At 12-bit output: Clamp level = CLAMP[7
0] x 8 + 56
At 10 bit output: Clamp level = (CLAMP[7...0] x 8 + 56) / 4
At 8-bit output: Clamp level = (CLAMP[7...0] x 8 + 56) / 16
3EH: TP0[7
0]
3FH:TP0[9
8]
[Test pattern level] Initial data: 768 (300H), data range: 0 to 1023
Sets the output level of the test pattern 4: Raster (variable level) in 10-bit output format.
54H:
STRBDLY[7..0]
55H:
STRBDLY[15..8]
56H:
STRBDLY[23..16]
[Delay time (us) for the strobe signal]
Initial data: STRBDLY[23..0] = 0, data range: 0 to 2,000,000
58H:
STRBPOL[7..0]
[Strobe signal polarity] Initial data: IOSIGNAL_POL[7..0] = 00H,
Sets the strobe signal polarity.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D1
No Function
Always set as “0000000”
D0:
Strobe signal polarity
0: Non-invert
1: Invert