RCA VGM500 - Manual (Page 8)

6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
Playback VCR From Antenna, Cable
or Cable Box
RF Coaxial Cable
(supplied)
Recording VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the previously selected
hookup to the TV.
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
Playback VCR (only)
Recording VCR
Audio/Video
Cables
RF Coaxial Cable
(supplied)
or
Use the previously selected
hookup to the TV.
From Antenna, Cable
or Cable Box
Audio/Video
Cables
Option A hookup.
Use this hookup for a simple connection which
requires fewer accessories.
1 . Select a hookup from pages 2 through 5 and
then modify with this connection.
2. Set the VCR output channel to either channel 3
or 4.
See page 8 for details.
You will tune the recording VCR to this channel to
receive the signal from the playback VCR.
3 . Connect as shown.
This connection may require additional accessories
not provided.
4 . Plug in power cords of VCRs and TV.
5.
Option B hookup.
Use this hookup for slightly improved copy
quality and hi-fi stereo recording.
1 . Select a hookup from pages 2 through 5 and
then modify with this connection.
2 . Connect as shown.
This connection requires additional accessories not
provided.
If your TV is not stereo, connect its audio jack to the
VCRÕs AUDIO L/MONO jack to hear sound from both
channels. If the VCR does not have a MONO jack, you
may need a Y-adapter.
3 . Plug in power cords of VCRs and TV.
4.
Select the line (audio/video) input on the
recording VCR to receive the signal from the
playback VCR.
Continue to page 7.
Continue to page 7.
B
A
Caution: The unauthorized recording of
television programs or other materials
may infringe the rights of others.