RCA VGM500 - Manual (Page 36)

34
References
Location of Controls
Back Panel
ANTENNA IN Connector
Receives the signal from an antenna or cable
system that is attached to this connector.
ANTENNA OUT Connector
Passes signal to TV using the coaxial cable
supplied.
VIDEO and AUDIO (RIGHT and L/MONO) IN
Jacks
Receives signals from another component, like a
VCR or camcorder, when it is connected to these
jacks. Use INPUT to select L1 in the VCRÕs
display panel to record from these jacks.
VIDEO and AUDIO (RIGHT and L/MONO) OUT
Jacks
Sends signals from VCR to another component,
like a TV monitor or VCR, when it is connected
to these jacks.
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
Display Panel
This VCR has a feature that allows you to change the brightness level of the
fluorescent display panel.
1 . Press MENU•PROG on the remote to see the
VCR MAIN MENU on the TV screen.
2 . Press 4 to display the PREFERENCES menu.
3 . Press 2 to select Front Panel: AUTO, BRIGHT,
or DIM.
¥ Select AUTO to keep the display panel bright
when VCR is on and dim when it is off.
¥ Select BRIGHT to keep the display panel
bright.
¥ Select DIM to keep the display panel dim.
continued on next page
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Video System: AUTO
5 Play NTSC as: NTSC
0 Exit