RCA VGM500 - Manual (Page 14)

12
Using the Remote Control
Buttons
SEARCH
VOL
VOL
MUTE PREV CH
DISPLAY
INPUT
1
4
7
TV•VCR
3
6
9
2
5
8
0
CLEAR SPEED
REW PLAY FF
STOP PAUSE REC
MENU
PROG *
POW
ER VCR1 SAT•CABLE TV
VCR2•LD AUX
CHAN
CHAN
TRACKING
3 4
SLOW – +
JO
G
SHUTTL
E
EDIT
AUX (Auxiliary)
Used with POWER button to turn on
compatible RCA audio component.
(See page 17.)
SAT•CABLE
Turns on a compatible RCA cable box
or digital satellite system receiver.
(See page 16.)
Used with POWER button to turn on
another brand of cable box, other
than RCA, when the remote is
programmed to control that cable
box. (See page 16.)
TV
Turns on a compatible GE, RCA, or
ProScan TV and sets the remote to
control the TV. Used with POWER
button to turn on another brand of
TV, other than GE, when the remote
is programmed to control that TV.
(See page 15.)
VCR1
Turns on a compatible GE, RCA, or
ProScan VCR and sets remote to
control the VCR.
VCR2•LD
Turns on a compatible GE, RCA, or
ProScan VCR and sets remote to
control VCR when it has been setup.
(See page 14.)
Used with POWER button to turn on
compatible RCA or ProScan
LaserDisc player.
Arrow Buttons ( )
Used for frame advance and variable
speed picture search when JOG
SHUTTLE
is turned on.
CHAN Up or Down
Selects next higher or lower channel in
the VCRÕs channel memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when
setting the clock or VCR for a timer
recording.
DISPLAY
Shows VCR operating displays on the
TV screen.
Displays the time counter.
EDIT
Signals two properly connected
compatible VCRs to begin copying a
tape. (See page 32.)
FF (Fast Forward)
Fast forwards the tape when the VCR
is stopped.
Searches the picture in forward
motion during playback.
INPUT
Turns the line input on or off.
L1
or L2 appears in VCRÕs display
panel and VIDEO1 or VIDEO2 appears
on TV screen.
Line input refers to the signal coming
from the component connected to the
audio/video input jacks on the back
(L1) or front (L2) of the VCR.
JOG SHUTTLE and Indicator Light
Used with arrow buttons for frame
advance and variable speed search.
(See page 21.)
The indicator in the middle of the
arrow buttons lights when JOG
SHUTTLE
is turned on.
MENU•PROG
Displays the VCR MAIN MENU on the
TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99 by pressing
two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1Р Р
appears on the screen. Then press the
other two numbers.
Component Buttons
Press one of the buttons to set the remote to operate that component.
VCR Function Buttons
Press VCR1 (VCR2•LD) to set remote to control the VCR to use the
function buttons.