Roberts Radio RecordR User Manual

Page 18

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to fi nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.

1. Press

the

On / Off button to switch on the radio.

2. Press and release the Band button until the FM band is selected.

3. Press and hold the Info button.

4. Press

the

Tuning Up or Down buttons until 'Scan sensitivity' appears

on the display. Press and release the Select button.

5. Press

the

Tuning Up or Down buttons to switch between Local and

Distant options on the lower line of the display. The Distant option will
allow the radio to fi nd weaker signals when scanning.

6. Press and release the Select button to confi rm your selection. The

radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.

Note: The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.

4,6

4,5