Roberts Radio RecordR User Manual
Page 12
11
Manual tuning - DAB
Manual tuning allows you to tune your radio to a particular DAB frequency
in Band III. Any new stations found will be added to the station list. This
function can also be used to assist the positioning of the aerial or the radio
to optimise reception for a specifi c channel or frequency. Note that UK
DAB stations are located in the range of channels 11B to 12D.
1. Press and hold the Info button.
2. Press
the
Tuning Up or Down buttons until the display shows 'Manual
Tune'. Press and release the Select button to enter the manual tuning
mode.
3. Press the Tuning Up or Down buttons to select the desired DAB
channel.
4. Press and release the Select button. The open block in the signal
strength graph shows you the minimum signal strength needed for
good DAB reception. The signal blocks will go up and down showing
the changing signal strength as you adjust the telescopic aerial or
the radio position. Any new radio stations found on the tuned DAB
multiplex will be added to the list stored in the radio.
5. Press and release the Select button to return to the normal tuning
mode.
1
2,3
2,3
2-5