RCA VR730HF - Manual (Page 5)

3
Hooking Up the VCR
Back of TV
300/75 Ohm
Adapter
OR
From Antenna
or Cable
Cable/
Antenna
VHF
UHF
OR
RF Coaxial Cable
(supplied) 75 to 75/300 Ohm
Separator
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
Back of VCR
IN
OUT
VIDEO1 AUDIO1
R L
S-VIDEO
OUT
IN
Antenna or Cable System Without a Cable Box
A. Basic hookup.
Use this hookup for a basic connection
which requires fewer accessories.
1 . Set the 3CH.4 switch on back of VCR to
either channel 3 or 4.
Tune the TV to this channel and use the
TV•VCR button to watch the VCR.
2 . Connect as shown.
This connection may require additional
accessories not provided.
3 . Plug in power cords of VCR and TV.
4.
B. Advanced hookup.
Use this hookup for slightly improved
picture quality, hi-fi stereo playback, and
more convenient operation Ñ use of the
TV•VCR button is not required.
1. Connect as shown.
This connection requires additional
accessories not provided. If your
TV/monitor has an
S-VIDEO connector,
also connect the supplied S-VHS cable to
take advantage of S-VHS. If your TV is not
stereo, you may need a Y-adapter to hear
sound from both channels.
2 . Plug in power cords of VCR and TV.
3.
Tune the TV to its video input to watch
the VCR. Set the
AUTO TV/VCR feature to
OFF . See the AUTO TV/VCR step in the
ÒStartupÓ section.
Go to ÒStartupÓ section.
Go to ÒStartupÓ section.
From Antenna
or Cable
OR
Back of TV
300/75 Ohm
Adapter
RF Coaxial Cable
(supplied)
AUDIO
CABLE /
ANTENNA
L /
MONO
RIGHT
VIDEO
INPUT
IN OUT
S-VIDEO
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
Back of VCR
IN
OUT
VIDEO1 AUDIO1
R L
S-VIDEO
OUT
IN
Audio/Video Cables
S-VHS
Cable
A
B