Location of controls, 42 references, Back panel – RCA VR730HF User Manual
Page 46
42
References
Location of Controls
Back Panel
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
IN
OUT
VIDEO1
AUDIO1
R
L
S-VIDEO
OUT
IN
3 CH. 4
Switch
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
IN FROM ANT.
(Antenna) Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV
Connector
Passes signal to TV using the cable supplied.
S-VIDEO OUT
and
IN
Connectors
Lets you attach another S-VHS component to the
S-VIDEO IN
connector using the included S-VHS
cable. Use
INPUT
on the remote to display
L1
in
the VCRÕs display panel to select.
Lets you attach the
S-VIDEO OUT
connector to a
TV monitor having an
S-VIDEO IN
connector to
take full advantage of the S-VHS format.
Also, remember to attach the audio jacks. The
S-VHS cable carries only video.
VIDEO1
and
AUDIO1
(
R
and
L
)
IN
Jacks
Receives signals from another component, such as
a VCR or camcorder, when it is connected to these
jacks.
Display
L1
in the VCR display panel using
INPUT
on the remote to select these jacks.
VIDEO1
and
AUDIO1
(
R
and
L
)
OUT
Jacks
Sends signals from VCR to another component,
such as a monitor TV or another VCR, when it is
connected to these jacks.
If the other component is not stereo, you may need
a Y-adapter to hear both channels.