Programming with code search, Retrieving codes, Menu functions – RCA RCU410MSL User Manual

Page 8

(BLINK)

Programming With Code Search

1. Turn on the device you wish

to program.

2. Press and hold

CODE SEARCH

until the

INDICATOR LIGHT

lights, then release

CODE

SEARCH.

3. Press and release the device

button for the device you are
programming (

TV, VCR

CABLE

). The

INDICATOR

LIGHT

will blink once then

remain lit.

Note: For AUX, press

SAT•AUX

then

the device button you are
assigning to AUX.

4. Press and release

ON•OFF

until

your device turns off.

Important:

You may have to press

ON•OFF

up to 200 times.

5. When your device turns off,

press the

ENTER

button, the

INDICATOR LIGHT

will go off.

If your TV, VCR, or Cable Box does not respond after you have
tried all the codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.

Retrieving Codes

1. Press and hold

CODE SEARCH

until the

INDICATOR LIGHT

lights, then release

CODE

SEARCH.

2. Press and release the device

button for the device’s code

you are retrieving (

TV, VCR

CABLE

). The

INDICATOR

LIGHT

will blink once then

remain lit.

3. Press and release

CODE

SEARCH

. The

INDICATOR

LIGHT

will blink, then stay on.

4. Starting with

on the keypad,

press the number buttons in

order (

0-9

) until the

INDICATOR LIGHT

blinks.

5. The number which causes the

INDICATOR LIGHT

to blink is

the first digit of your code.

6. Repeat step 4 until you have

retrieved all three numbers in

the code. The light will now

go out.

If you need to find the three-digit code for your TV, VCR or
Cable Box after your device is set-up using Code Search, use
this procedure.

…

(OFF)

INDICATOR

LIGHT

The Menu is used to make changes such
as setting color, channels, timers, etc.

Entering the Menu Mode:

1. Push the

DEVICE

button on the

remote.

2. Push the

MENU

button.

This puts the remote in Menu Mode.
The Menu should now be visible on
the television. The

INDICATOR LIGHT

will blink continuously to indicate the
remote is now in Menu Mode.

While in

MENU

these buttons will

function as follows:

VOL UP/DOWN

buttons will

operate as

CURSOR RIGHT/LEFT

CH+/-

keys will operate as

CURSOR

UP/DOWN

For RCA, GE an ProScan, pushing the

MENU

button will select the highlighted

item. The numeric buttons may also be
used to select the

MENU

choice.

Note: Not all functions in competitive models and

brands of televisions may be fully supported.

Exiting the Menu Mode:

To exit the Menu Mode and clear the
screen push the

DEVICE

button on the

remote. The

INDICATOR LIGHT

should go out indicating the remote is
now out of Menu Mode and will
revert to it’s normal mode of
operation.

Note:

The remote will automatically exit the
Menu Mode after 10 seconds of inactivity
with no buttons being pushed.

Special notes:
1.Because of the wide variety of menu

formats, some experimenting may be
required.

2.SONY: Pressing the

ENTER

button while

in menu mode returns to
previous menu.

3. ZENITH: Push the menu button a

second time to move from
the

SET-UP MENU

to the

VIDEO MENU.

(BLINK)

Menu Functions

CODE

(BLINK)

INDICATOR

LIGHT

CODE

RCU410MSL_IB 10/4/01 1:57 PM Page 14