RCA RCU410MSL - Manual (Page 3)

Programming For TV
TV Code List
1. Manually turn on the TV.
Find the three-digit code for
your TV in the code list below.
2. Press and hold the CODE
SEARCH button until the
INDICATOR LIGHT lights, then
release the CODE SEARCH
button.
3. Press and release the TV button
(the INDICATOR LIGHT will
blink then remain lit).
4. Enter the code using the
Number Buttons.
After your code is entered, the
INDICATOR LIGHT will turn off.
5. Aim the remote at your TV and
press the ON•OFF button. Your
TV should turn off.
Note: If your TV does not respond, try all
the codes for your brand. If the codes
do not work, or your brand is not
listed, try the Code Search method on
page 13.
6. With your TV on, press
CH+ . If the TV responds,
no further programming is
required.
7. Enter your code here
for easy reference.
Abex ............................................185
Acme ..................................010, 050
ADA ............................................025
ADC ....................................001, 005
Admiral ................................001, 174
Adventura ....................................174
Aiko..............................................058
Alleron..........................................046
Amark ..........................................020
Amtron ........................................053
Akai..............................................002
Amstrad ......................................189
Anam National ....................003, 025
....................................042, 053, 193
AOC ....................004, 005, 007, 009
............................014, 132, 156, 175
Archer ..........................................020
Audiovox ......................................053
Belcor ..........................................004
Bell & Howell ..............000, 001, 049
Bradford ......................................053
Broksonic ............................136, 147
Brokwood ....................................004
Candle ................004, 008, 009, 174
Capehart ......................................175
Celebrity ......................................002
Centurion ....................................009
Cetronic ......................................042
Citizen ........001, 004, 008, 009, 042
....................053, 058, 105, 109, 177
Clairtone ......................................014
Classic ........................................042
CLP..............................................059
Colortyme ....................004, 009, 010
Concerto ..............................004, 009
Concierge ....................................121
Contec/Cony012, 013, 014, 042, 053
Craig ....................................042, 053
Crown ..................................042, 053
Curtis Mathes ......000, 001, 004, 009
....................015, 031, 049, 105, 109
CXC ....................................042, 053
Daewoo ......004, 005, 009, 017, 018
....................019, 042, 058, 082, 083
....................085, 097, 100, 126, 127
Daytron ................................004, 009
Dimensia..............................000, 031
Dumont ................................004, 121
Dynasty........................................042
Elektra..........................................001
Electroband ........................002, 014
(BLINK)
INDICATOR
LIGHT
TV CODE
(OFF)
Battery Installation
Your Universal Remote requires 2 new AAA alkaline
batteries.
To install the batteries:
1. On the back of the remote, push and slide the
cover off.
2. Match the batteries to the + and - marks inside the
battery case, then insert the batteries.
3. Press and slide the battery cover back into place.
Note: Reprogramming may be required after batteries are removed.
INDICATOR LIGHT
The Indicator Light flashes to show that the remote is working.
ON•OFF
The ON•OFF button operates the same as your original remote
Note: Some RCA, GE and ProScan models require you to press
the device button to turn the device on and the ON•OFF button
to turn the device off.
CODE SEARCH
Used to program the remote or to search through codes.
TV, VCR, CABLE, SAT•AUX
The TV, VCR, CABLE, and SAT•AUX buttons are used to select
the device you want to control.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
The REVERSE, PLAY, FORWARD, RECORD, STOP, and PAUSE
buttons operate the same as on your original VCR remote. You
must press the RECORD button twice to begin recording.
TV•VCR
The TV•VCR button operates the TV•VCR function of your VCR.
ENTER
The ENTER button is used to complete channel selection for some
brands of TV. It is also used to complete the code entry process.
VOL & CH
The VOL (Volume) and CH (Channel) buttons increase or
decrease the channel numbers or volume.
MUTE
To MUTE the volume on the TV.
PREV CH
PREV CH allows you to go to the previous channel you selected.
Operates the same as Last Channel, Go Back or Recall button on
your original remote.
0-9
The number buttons operate the same as on your original remote,
and are used for entering device codes or channel numbers.
MENU
The MENU button calls up the TV and DBS set up menus.
SLEEP
The SLEEP button allows you to set a time to turn off the TV
automatically.
L1, L2, L3, L4
The L1–L4 buttons are used for storing learned functions from
other remote controls.
LEARN
The LEARN button allows you to “record” and “delete” learned
functions from your remote control.
Button Description
3 4
CODE
SEARCH
RCU410MSL_IB 10/4/01 1:57 PM Page 4