Ricoh D015 - Manual (Page 13)

Product Support Guide
D014 / D015
Ver.1.9 Page 13 of 38 1/16/2009
Subject to change without notice
Installation
Installation Requirements
Temperature Range: 10° C to 32° C (50° F to 89.6° F)
Humidity Range: 15% to 80% RH
Ambient Illumination: Less than 1,500 lux (do not expose to direct sunlight)
Ventilation: 3 times/hr/person
Ambient Dust: Less than 0.10 mg/m 3
Avoid areas exposed to sudden temperature changes:
• Areas directly exposed to cool air from an air conditioner.
• Areas directly exposed to heat from a heater.
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,500 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2”)
Do not place the machine where it may be subject to strong vibrations.
• Front to back: within 5mm (0.2”) of level
Machine level
• Right to left: within 5mm (0.2”) of level
Power Requirements
Line voltage level:
D014: 120V 60 Hz 20A D015: 208 to 240V 50~60 Hz 20A
Permissible voltage fluctuation: +/-10%
Never set anything on the power cord.
D014 (MP C6000) Only D015 (MP C7500) Only