Ricoh 6513 - Manual (Page 59)

Copying
44
2
D
Adjust the paper guides to the paper size.
1. Horizontal size
2. Vertical size
3. Extender
4. Paper guides
Note
❒ Make sure the paper size and direction in the bypass tray is displayed on
the operation panel.
❒ Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or a pa-
per misfeed might occur.
❒ With large copy paper (more than A4L, 8 1 /
2
" × 11"L), swing out the ex-
tender.
E
Insert the paper into the bypass tray until it stops. The side you wish to
copy onto should be face up.
F
Place your originals, and then press the
{{{{Start}}}} key.
Note
❒ The copy paper rises, and then copying starts. Shortly after copying finish-
es, the copy paper descends.
Cat2-5_FM.book Page 44 Tuesday, February 20, 2001 9:27 AM