Ricoh 6513 - Manual (Page 20)

5
8. Stopper
When you copy onto thin paper, raise
this to prevent curling.
9. Copy tray
Completed copies are delivered here.
10. Main power switch
To start the machine, turn on this switch.
Note
❒ If the machine does not operate after
turning on the operation switch, check
if the main power switch is turned on.
If it is off, turn it on.
1. Ventilation hole
Prevents overheating. Do not obstruct
the ventilation hole by placing or leaning
an object near it. If the machine over-
heats, damage might occur.
2. Bypass tray
Use to copy onto OHP transparencies,
adhesive labels, translucent paper, post
cards, and custom size paper,
⇒ P.41
“Copying from the Bypass Tray”.
3. Right side cover/Lower right cov-
er
Open this cover to remove jammed pa-
per.
Preface2-1 Page 5 Tuesday, February 20, 2001 9:26 AM