Ricoh 6513 - Manual (Page 25)

10
Entering Numbers
When the display prompts you to enter a number, type in the number with the
number keys and press the [#] key on the display to accept it.
Should you make a mistake:
• If you have not pressed the [#] key yet, press the [Clear] key, and then re-enter
it. If there is no [Clear] key on the display, press the {Clear/Stop} key.
• If you have already pressed the [#] key, press the item you wish to change on
the display and re-enter the number with the number keys. Press the [#] key
on the display to accept it.
Checking the functions you have selected
When you set one or more copy settings, the last item you selected will remain
on the screen.
1. [Check Modes] key
To check all the settings you have set so far, press the [Check Modes] key.
Preface2-1 Page 10 Tuesday, February 20, 2001 9:26 AM