Ricoh 6513 - Manual (Page 244)

Where to Put Your Machine
229
8
Power Connection
R WARNING:
R CAUTION:
R CAUTION:
• Make sure the plug is firmly inserted in the outlet.
• Voltage must not fluctuate than 10%
• The socket-outlet shall be installed near the equipment and shall be easily ac-
cessible.
Access to Machine
Place the machine near the power source, providing clearance as shown.
1. Rear: more than 10cm, 4.0"
2. Right: more than 45cm, 17.8"
3. Front: more than 55cm, 21.7"
4. Left: more than 48cm, 18.9"
Note
❒ For details about required space when options are installed, please contact
your service representative.
• Only connect the machine to the power source described on the inside
front cover of this manual. Connect the power cord directly into a wall
outlet and do not use an extension cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
TRSR120E
1
2
4
3
Cat2-5_FM.book Page 229 Tuesday, February 20, 2001 9:27 AM