RCA 28300 - Manual (Page 37)

37
Searching
From the CONTACTS menu;
1. Use the 6 or 5 button to select
SEARCH.
. Press the OK (SKL) button to enter the menu.
3. Scroll to entry or enter the first letter of the name to quick search an entry.
4. Press the
OK (SKL) button to select.
5. Press the DETAILS (SKL) button to edit the name and numbers, delete the entry or
change the group.
6. Press the OK (SKL) button to confirm selection.
Adding
From the CONTACTS menu;
1. Use the 6 or 5 button to select
ADD.
. Press the OK (SKL) button to enter the menu.
3. Enter the name using the keypad (up to 16 characters).
4. Press the
OK (SKL) button to confirm.
5. Enter the number (up to 4 digits).
6. Press the
OK (SKL) button to confirm. (Repeat steps 5 & 6 for additonal numbers or
press the OK (SKL) button repeatedly to advance to group selection.
7. Use the 6 or 5 button to select desired group.
8. Press the
OK (SKL) button to confirm.
NOTE: If all the memories are occupied, “Memory Full” appears in
the display.
NOTE: Enter a number in standby mode, and then press OK (SKL)
button to save the number. Follow the procedure as described
above. User can also save a number through the Call Log (refer to
“Call Log Operation”).