Skype calls – RCA 28300 User Manual
Page 26
6
Dial the number and then press the (landline) or (speaker) button.
NOTE: If you make a mistake, use the DELETE (SKR) button to
backspace and delete one number at a time.
. When finished, press the END CALL button or place the handset in the base cradle
to hang up.
NOTE: During the conversation, you can use the 6 or 5 button to
adjust the receiver/speaker volume (5 levels).
NOTE: Call timer will start counting when you press the telephone
key and go off-hook, the call timer format is HH:MM:SS.
NOTE: After connection is established, user can view phone book by
pressing the Contact (SKR) button
Skype Calls
In order to make or receive a Skype call, please check the following:
1. PC is powered on and not in standby or hibernate mode.
. Skype is logged into and running properly (Skype software should be 1.4 or later
version).
3. 8300 Hardware connected to PC and USB Driver is functioning properly.
SkypeOut Call
SkypeOut allows you to use your internet connection to call ordinary telephones and
mobile telephones worldwide.
1. Dial the number with format; 001, area code, telephone number. You must dial the
"1" and the area code even if it is a local number, othewise you will dial up another
country. For international calls; 011, country code, telephone number.
- OR -
Press the
(Skype) button. The first entry in the Skype contacts list appears. Use
the 6 or 5 button to scroll to the required subscriber from the list or enter the
first letter of the name.
. Press the
(Skype) button to connect.
3. When finished, press the END CALL button.