Ritek QuattroDrive - Manual (Page 9)

Getting Started
5
Connecting to a TV or Projector
Follow these steps to connect the QuattroDrive to a television or projector.
1. Connect the audio cable (red and white plugs) from the AUDIO socket to
the audio IN socket of your TV or stereo system.
2. Connect the AV cable (yellow plug) from the QuattroDrive VIDEO socket to
the VIDEO IN socket of the TV or projector.
NOTE: The audio cable leading to the QuattroDrive has two black bands on the
connector; the video cable has only one black band on the connector.
Connecting to a Computer
Follow these steps to connect the QuattroDrive to a computer
1. Connect the USB cable from the QuattroDrive USB port to the USB port on
the back of the computer.
2. A “New hardware found” screen appears. Follow the instructions on the
screen and restart your computer when prompted.
If you have Windows 98, you will need to install the drivers as described in In-
stalling Drivers on page 7.
Once the drivers have been installed, a CD drive icon and up to three removable
hard drive icons will appear in My Computer on the desktop.
AUDIO/OPTICAL COMPONENT
DC IN 9V
VIDEO/SVIDEO
L R
Audio in Video in
AUDIO/OPTICAL COMPONENT
DC IN 9V
VIDEO/SVIDEO