Turning the quattrodrive on, Installing drivers – Ritek QuattroDrive User Manual
Page 11
Getting Started
7
Turning the QuattroDrive On
To turn on the QuattroDrive:
1.
Make the appropriate connections as described in Getting Started on
page 4.
2.
Push the POWER ON/OFF button for about two seconds. The front LCD
panel lights up and if connected to a TV or projector, the main screen
appears.
Installing Drivers
For Windows 98SE and ME, you will need to install the Card Reader and CD-
RW drivers.
1.
Connect the QuattroDrive to the computer as described in Connecting to a
Computer on page 5.
2.
Insert the supplied
driver CD into the
CD-ROM drive. The
following screen is
displayed.
3.
Click Card Reader
Driver for Win 98SE/
ME/2k/XP and follow
the instructions on
the screen.
4.
Click CD-RW Driver
for Win 98SE and fol-
low the instructions
on the screen.
NOTE: For Mac OS X, refer to the mac_installation.pdf file located in the
Mac_Installation directory of the Driver CD for installation instructions.