Ritek QuattroDrive - Manual (Page 13)

Using QuattroDrive
9
6. Press the UP and DOWN buttons to select the options for that setting.
7. Press the ENTER button to confirm your option.
To exit, press the LEFT button to return to the submenu settings in the left col-
umn. Scroll down to MAIN PAGE and press ENTER to return to the main menu.
Scroll down to EXIT SETUP and press ENTER to exit the SETUP MENU.
Pressing the SETUP button on the remote control at any time will also exit the
SETUP MENU.
If an arrow appears at the top or bottom of the left menu button column, it means
there are more menus/options to choose from that aren’t displayed on the
screen.
Adjusting the TV Settings
To adjust the TV Settings:
1.
Enter the SETUP MENU
as described in Navigating
the Menus on page 8.
2. Enter the PREFERENCES
page and select TV TYPE.
3. Select the TV type
required. Options are
MULTI, NTSC, and PAL.
MULTI means that both
NTSC and PAL signals are
sent from the QuattroDrive
to the TV or Projector.
NOTE: You will also need to know whether the source DVD is in NTSC or PAL
format before setting this option.