Ritek QuattroDrive - Manual (Page 30)

Writing (Burning) Files to a CD
26
Repeating Chapters/Tracks
Press the REPEAT button on the remote control for repeating chapters or
tracks.
For DVDs, this will cycle through CHAPTER REPEAT ON, TITLE REPEAT ON
and REPEAT OFF. The current chapter or title will be repeated.
For music, REP-ONE will repeat the current track while REP-ALL will repeat all
tracks. REPEAT OFF will turn of repeating of tracks.
The REP A-B button is used for repeating between several titles or tracks.
1. Press the REP A-B button to set the start position. The A TO B SET A
message will be displayed.
2. Continue playing as normal until the desired end position and press REP
A-B button again. The A TO B SET B message will be displayed.
3. Press the REP A-B button once again to cancel repeated playback.
Writing (Burning) Files to a CD
Files can be written to a CD-R or CD-RW, which is known as burning, as a way
of backing up files. With a CD-RW, multi-session CDs are created enabling you
to write to the CD as many times as you like.
Writing from a Flash Memory Card
There are two methods which you can use to write from a Flash Memory Card to
a CD-RW.
When the QuattroDrive is connected to a TV/projector, follow the steps below.
1.
Insert the Flash Memory Card as described in Inserting Flash Memory
Cards on page 6.
2. Set up the disk burning options as described in DISC SETUP on page 18.
3. Insert a CD-RW or a blank CD-R into the QuattroDrive as described in
Inserting and Removing a CD on page 6.
SHUFFLE
REPEAT REP A-B CLEAR MENU
SETUP
FF FR NEXT PREV
REPEAT
SHUFFLE
REPEAT REP A-B CLEAR MENU
SETUP
FF FR NEXT PREV
REP A-B