Renesas M16C/62P Group - Manual (Page 31)

Rev.1.00 2007.11.1
REC10B0002-0100 29
__ConfigSerialDriverNotify
Synopsis
Boolean __ConfigSerialDriverNotify(unsigned long data, VoidFuncNotify *func)
data Setup data
func Function pointer to be registered
Description Registers the notification function necessary to get various transmit/receive information
of serial communication.
[data]
For data, the following values can be set.
RAPI_COM1 UART0 RAPI_COM2 UART1
RAPI_COM3 UART2 RAPI_COM4 SI/O3
RAPI_COM5 SI/O4
[func]
The function to be registered in func must be supplied to the serial I/O driver by the
user.
The serial I/O driver calls the function registered in func.
The serial I/O driver notifies the user of the transmit/receive status by an argument.
The type of the function to be registered is shown below.
void “any function name” (unsigned char notify);
The argument is detailed below.
(UART0, UART1, UART2)
(SI/O3,SI/O4)
b7 b6 b5 b4 b3 b2 b1 b0
0 0 X X 0 0 0 0
0 Not completed
1 Completed
0 Not completed
1 Completed
Reception completed
Transmission completed
b7 b6 b5 b4 b3 b2 b1 b0
0 0 X X 0 X X X
0 No error
1 Error occurred
0 No error
1 Error occurred
0 No error
1 Error occurred
0 Not completed
1 Completed
0 Not completed
1 Completed
Transmission completed
Reception completed
Overrun error
Framing error
Parity error