Roland F-100 - Manual (Page 19)

19
Playing the Keyboard
■ Changing the Beat
To change the beat, specify the beat by pressing the key (A0–E1) to which
the beat is assigned.
You can select from the following five types: 0 (only upbeat sounds),
2 (2-beat), 3 (3-beat), 4 (4-beat), 6 (6-beat).
fig.02-07
1.
Hold down the [ (Metronome/Rhythm)] button and
press the key to which the beat is assigned.
■ Adjusting the Volume
You can adjust the volume of the metronome and rhythm (p. 20) to any of
five possible levels.
The setting is at “3” when the power is turned on.
fig.02-08
1.
Hold down the [ (Metronome/Rhythm)] button and
press one of the Tone buttons.
The Tone button indicator will blink to indicate the current volume, when
press and hold the [ (Metronome/Rhythm)] button.
It is not possible to change
the beat during song
playback or recording.
Max Min
Reverb Volume Strings Organ E.Piano Harpsi- chord Piano
0 2 3 4 6
Song
Key Touch Dual Balance
Variation
Song
Key Touch Dual Balance
Variation Play
1 2
Rec
Recorder
Track
Reverb Strings Organ E.Piano
Harpsi-
chord Piano
1 2 3 4 5
Song
Key Touch Dual Balance
Variation
Press
While holding down...
Increase the metronome
volume
F-100.e.book 19 ページ ２００３年８月２９日 金曜日 午前９時４８分