Radio Shack TAD-1004 - Manual (Page 14)

14
• You can store a FLASH entry in
memory if it is the first entry.
4. Select the memory location as fol-
lows:
• For a priority memory location,
press P1 , P2 , or P3 .
• For an indirect memory location,
press MEMORY , then enter a two-
digit memory location number
(01-10).
5. Press STORE again.
6. Follow Steps 2-5 to store more
phone numbers.
7. Return the handset to the cradle.
Dialing a Stored Number
To dial numbers stored in memory, lift
the handset and do one of the following:
• For priority memory numbers,
press P1 , P2 , or P3 for the number
you want to call.
• For indirect memory numbers,
press MEMORY . Then press the
two-digit memory location number
for the number you want to call.
Testing Stored Emergency
Numbers
If you choose to place test calls for
stored emergency numbers, follow
these guidelines:
• Remain on the line and briefly
explain to the operator the reason
for the call before you hang up.
• Make these calls in off-peak hours,
such as early morning or late
evening.
Using the Phone Number
Index Card
Use the phone number index card on
the lower left of the base to record im-
portant phone numbers. We suggest
you use a pencil in case you change
one of the numbers.
43-744.fm Page 14 Friday, August 13, 1999 2:10 PM