Ricoh CAPLIO R30 - Manual (Page 94)

92
Viewing an S Multi-Shot or M Multi-Shot Still
Image in Enlarged Display Mode
While still images (16 frames in a file) taken by SCONT or MCONT
are displayed, one of the 16 frames can be displayed in an enlarged
view. While viewing an enlarged frame image, you can switch
between frames.
To view a shot from S Multi-Shot or M Multi-Shot still images in
Enlarged Display Mode, follow the steps below.
1.
Press the 6 (Playback) button.
The last shot taken is displayed.
2.
Press the #$ buttons to display
an S Multi-Shot or M Multi-Shot
still image.
3.
Press the 8 (Enlarged View)
button.
The first frame of consecutive images is
displayed in Enlarged Display Mode.
The shot position bar appears at the
lower part of the LCD monitor.
Press the #$ buttons to switch frames.
To return to the 16-shot display, press
the M/O button.
Note
Press the DISP. button to turn on or off the bar display at the lower part of the LCD monitor.
Reference
For how to shoot images in S Multi-Shot or M Multi-Shot mode, see P.89.