Ricoh CAPLIO R30 - Manual (Page 119)

117
Chan
gi
ng Cam
era
S
e
ttings
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the beep sound settings, follow the steps below:
1.
Display the setup menu.
For detailed operation, see P.111.
2.
Press the " button to select
[BEEP SOUND] and press the $
button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the M/O or # button.
5.
If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Reference
For how to adjust volume, see P.118
Start sound : Sound when the camera power is turned on.
Shutter release sound : Sound when the shutter button is pressed.
Focus sound : When the focus is set, the camera generates the focus sound.
Beep Sound : If an impossible operation is attempted, the camera generates the beep sound.
Possible Settings
SHUTTER (Shutter release sound, Beep Sound)
ALL (all sounds on) *Setting upon purchase