Ricoh CAPLIO R30 - Manual (Page 121)

119
Chan
gi
ng Cam
era
S
e
ttings
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to 0.5 seconds, but this can
be changed.
To change Confirmation Time, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.111.
2.
Press the " button to select [LCD
CONFIRM.] and press the $
button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the M/O or # button.
5.
If you pressed the # button in step
4, press also the M/O button.
This setting will be used until you change it.
Caution
When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may remain on
the monitor while the image is displayed.
Possible Settings
OFF (Photo not displayed for confirmation)
0.5 Seconds *Setting upon purchase
1 Second
2 Seconds
3 Seconds